Why Timely and Proper DPF Cleaning is Important

Why Timely and Proper DPF Cleaning is Important
Article by Jim Sutherland

Preventative Maintenance on fleet vehicles is being talked about a lot these days. Especially when it comes to Diesel Particulate Filters (DPF’s) and how their cleaning and maintenance should be integrated into the maintenance schedule. A variety of factors can contribute to when DPF cleaning needs to be done, but all DPFs will need to be cleaned at some point. With that said, we wanted to discuss how often a DPF will need to be cleaned and the proper procedure for doing so.

How Often Does a DPF Need Cleaned?

The factors that contribute to how often a DPF will need cleaned are many, and they include the obvious things like mileage, gallons of diesel burned and the number of hours the motor has been running. However, there are other factors like the state of tune of the motor and service conditions that can significantly impact the intervals. Even factors like the quality of fuel being used can have an impact. The real answer to the question of how often a DPF will need to be cleaned is different for every vehicle.

One important thing to note about DPF cleaning is that it is different from an active or passive filter regen in the vehicle. While proper regen is important, it does not remove ash from the filter. Many drivers assume once the Regen button is pushed the soot dissolves and is pushed out the exhaust system. What truly happens is this ash will accumulate in the filter and reduce its effectiveness as time goes on. To properly clean a DPF, you will need to remove it from the vehicle and subject it to a proper full filter cleaning.

What is Involved in a Proper DPF Cleaning?

A proper DPF Cleaning will require the use of specialized equipment like our Enviromotive EvacuBlast System. This system is unique in its process that utilizes high-pressure air to penetrate and knock loose the blockage of the cells (small channels containing the soot) and extreme suction to pulling the soot from the exact same cell. Depending on how loaded the filter is, it may also need to be exposed to baking process in a specialty piece of equipment like the EvacuBlast Regeneration Oven. The oven exposes the DPF to very high temperatures to loosen the contaminants so they can be removed with the EvacuBlast Cabinet. Most shops will bake and blast every filter which will bring the DPF close to a like new state. A clean DPF will help your vehicles run cleaner and more efficient. This can not only save you money on maintenance, but can save you downtime and the much higher cost of a full replacement filter if the cleaning is neglected for too long.

For an overview of the EvacuBlast DPF Cleaning Process, Click the link below:

Evacublast System from Enviromotive - DPF Cleaning Process Overview

To learn more about how often a DPF might need cleaned and understanding the proper procedures to clean and care for a DPF, please give us a call. Enviromotive can provide complete diesel filter cleaning procedures and solutions to fleet managers. Whether you choose to have your cleaning done by an outside facility or you want to bring the cleaning in house, we can guide you every step of the way. We offer have the best informed technical support available in the industry.

We also offer top dollar for recycling your spent filters, supplying the best US-Made, OE quality, aftermarket DOCs and DPFs and all the ancillary parts you need at very competitive prices. With our EvacuBlast DPF Cleaning System, we also provide best in class filter cleaning equipment if you choose to do your own cleaning.

Fill out the contact form below if you are interested in learning more. We look forward to hearing from you!

Your Name (required)

Your Email (required)

Your Phone # (required)

Your Message

Leave a Reply

Your email address will not be published. Required fields are marked *